加入會員
網站簡介
聯絡我們
展會總覽
會員權益
常見問題
產品簡介
 Product
PRINTING MACHINE / CI Roll-to-Roll

應用產品圖片


BRAND OF MAIN ELECTRONIC PARTS AND MOTOR:
1. Electronic motor, reducer: Taiwan Teco
2. Servo motor: Japanese Yaskawa
3. Operation Monitor: SIEMENS
4. PLC controller: SIEMENS
5. Inverter: Japanese MITSUBISHI or ABB
6. Sensor detector: Korean made (ONIKS) or Taiwan
7. Relay: OMRON
8. Air Cylinder and solenoid valve: Taiwan made
9. Contact breaker, contactor, push button: France made (SNID)
10. Conveyor belt: Holland
11. Main Ball bearing: Japanese
12. Bearing set: Sino-Germany joint venture brand
13. EPC: Taiwan Made
14. All the electronic parts: CE or UL approval
15. Electronic control protection: Designed as the degree of “IP21”
16. Temp controller: Taiwan


BRAND OF MAIN ELECTRONIC PARTS AND MOTOR:
Power supply: 3 Phase 380V
Voltage variation: max ±10%
Frequency 50HZ
Frequency variation ±2HZ
 

PACKING
The machines will be packed in standard 1×40’HQ containers.
 

Each machine consists of:

1). Elevator for Loading Fabric
Model: PS-B for lift of 1ton
2).Unwinding and Take-Up Unit
Two working position unwinding (one standby, one unwinding)
Sensor control No-Stop Fabric Roll Switch-Over
EPC for Unwinding
3). Full Auto Printing Unit (Double Impression Cylinder)
1 set of Servo-Motor for driving with inverter control
2 pcs of Impression Cylinder
10 sets of Printing Roller, Anilox Roller and Rubber Roller for 10 Colors
10 sets of Auto-Recirculation/Mixing System for Paint mixture (Air Pump)
4). 2 sets of Infra Red Dryers for both sides drying
Auto lift when stopping printing
Dryer size: 800mm×1000mm
5). Cutting Unit
Vertical & Heat Cutting with Bag Mouth Open System
Auto Counting, Stacking & conveyor-belt advancing
Servo Motor controls the cutter
6). Winder
Take-up unit to control winding tension
EPC equipped for rewinding
7). Electrical Control Panel
1 set of Mitsubishi inverter for Unwinding
1 set of Mitsubishi inverter for Winding
1 set of Mitsubishi inverter for Main Motor
1 set of Servo Controller for Servo Motor to control printing
1 set of Mitsubishi inverter for Take-up Unit
1 set of Servo Controller for Servo Motor to control Cutting
 

Machine Feature
1). Single-Pass, two side printing
2). High Precision Color Positioning
3). No Roller Change needed for Different Printing Sizes
4). No-stop Fabric Roll Switch-over
5). Edge Position Control (EPC) for Winding and Unwinding
6). Auto Recirculation/Mixing System for Paint Mixture
7). Infra Red Dryer, auto lift when stopping machine
8) Vertical heat cut by servo control, with bag mouth open
9). Servo-motor Drive with Inverter Control
10). PLC Operation Control, Digital Display for Operation Monitor and Operation Setting